User Manual Q&AAnswer
Nov 10, 2024 - 11:58 PM
To connect the Fluance SX51WC speaker system to your amplifier or receiver, follow these steps:
1. Ensure that your amplifier or receiver is turned off before making any connections.
2. Use high-quality speaker cables to connect the speakers. Make sure to match the polarity (+/-) of the speaker connections on both the speaker and amplifier end. This means connecting the positive (+) terminal on the speaker to the positive (+) terminal on the amplifier, and the negative (-) terminal on the speaker to the negative (-) terminal on the amplifier.
3. Connect the bookshelf speakers, surround speakers, and center channel speaker to the corresponding speaker outputs on your amplifier or receiver. The bookshelf speakers are typically used for the front left and right channels, the surround speakers for the rear left and right channels, and the center channel speaker for dialogue and vocals.
4. Connect the subwoofer to the subwoofer output on your amplifier or receiver. The subwoofer is responsible for producing deep bass frequencies. Ensure that the subwoofer is powered on and connected properly.
5. Once all the connections are made, double-check that they are secure and tight.
6. Turn on your amplifier or receiver and gradually increase the volume to your desired listening level.
By following these steps, you should be able to successfully connect the Fluance SX51WC speaker system to your amplifier or receiver and enjoy optimal sound quality.
Add New Comment