User Manual Q&AAnswer
Nov 10, 2024 - 11:50 PM
To connect the Q Acoustics Concept 90 Center Channel Speaker to your amplifier or receiver, follow these steps:
1. Ensure that all devices, including the speaker, amplifier, and receiver, are powered off before making any connections.
2. Use high-quality optical cables to connect the speaker to your amplifier or receiver. Locate the optical audio output on your amplifier or receiver and the corresponding input on the Concept 90 speaker.
3. Insert one end of the optical cable into the optical audio output on your amplifier or receiver.
4. Insert the other end of the optical cable into the optical audio input on the back of the Concept 90 speaker.
5. Once the optical cable is securely connected, power on your amplifier or receiver.
6. Power on the Q Acoustics Concept 90 Center Channel Speaker.
7. Adjust the volume on your amplifier or receiver to the desired level.
By following these steps, you should be able to successfully connect the Q Acoustics Concept 90 Center Channel Speaker to your amplifier or receiver and enjoy its immersive sound quality in your home theater setup. For more detailed instructions, please refer to the user manual provided with the speaker.
Add New Comment