User Manual Q&AAnswer
Nov 10, 2024 - 11:36 PM
The Pyle PDIC106 Ceiling Wall Mount Speakers can be installed in two ways: in-wall or in-ceiling flush mount using the convenient spring-loaded clips. Here is a step-by-step guide for installation:
1. Determine the desired location for the speakers on the wall or ceiling.
2. Cut a hole in the wall or ceiling according to the provided cutout size. Ensure that there is at least half an inch of space between the hole and any wall studs.
3. Connect the speaker wires to the speakers. Make sure to match the positive (+) and negative (-) terminals correctly.
4. xxxx down each of the four Phillips head screws to secure the speakers to the wall or ceiling. The locking tabs will swivel into place and hold the speakers in position.
5. Put in the strips of adhesive provided to secure the grille.
6. Replace the metal grille over the speakers.
7. Repeat the above steps for the second speaker if installing a pair.
8. Complete the installation by connecting the speaker wires to your audio receiver or amplifier.
For more detailed instructions and illustrations, please refer to the Pyle PDIC106 Ceiling Wall Mount Speakers Installation Manual.
Add New Comment