User Manual Q&AAnswer
Nov 10, 2024 - 11:31 PM
To connect the Acoustic Audio AA40CB 3-Way Speaker to your amplifier or receiver, follow these steps:
1. Ensure that your amplifier or receiver has raw speaker wire outputs. These are typically labeled as "Speaker Out" or "Speaker A/B."
2. Measure the distance from the speaker's location to the amplifier or receiver. This will help determine the length of speaker wire you'll need.
3. Using wire strippers, strip about 1/2 inch of insulation from each end of the speaker wire to expose the bare wire.
4. The Acoustic Audio AA40CB 3-Way Speaker features spring-loaded raw wire connectors. Press down on the spring clip, insert the stripped end of the wire ensuring that red goes to red (+) and black goes to black (-), then release the spring clip to secure the wire.
5. Connect the other ends of the speaker wires to the corresponding terminals on your amplifier or receiver, maintaining the same polarity (red to red, black to black).
6. Ensure that your amplifier or receiver is powered on and functioning.
By following these steps, you should be able to successfully connect your Acoustic Audio AA40CB 3-Way Speaker to your amplifier or receiver. For more detailed instructions, refer to the user manual provided with the speaker.
Add New Comment