User Manual Q&AAnswer
Nov 10, 2024 - 11:13 PM
To connect the iRig Voice microphone to your device, follow these steps:
1. Plug the microphone into your compatible device's 3.5mm jack or USB port, ensuring a secure connection.
2. Position the microphone close to your sound source, adjusting the angle and distance for the best results.
3. If needed, activate the microphone or provide the required power, such as batteries or USB power.
4. Modify the microphone volume or gain settings as necessary, starting conservatively and increasing if required.
5. Use headphones or monitor speakers to listen in real-time, allowing adjustments for improved audio.
6. Open your chosen recording or streaming software and select the microphone as the input.
7. Perform a test recording to check the audio quality and make adjustments as needed.
8. Save your recordings to your device or preferred storage for later use or sharing.
9. Safely disconnect the microphone after recording to prevent potential damage.
For more detailed instructions, please refer to the user manual included with the iRig Voice microphone.
Add New Comment