User Manual Q&AAnswer
Nov 10, 2024 - 10:40 PM
To connect your smartphone or tablet to the Luqeeg Wireless Smart Android Projector, follow these steps:
1. Power on the projector and ensure it is connected to a power source.
2. On your smartphone or tablet, go to the Wi-Fi settings.
3. Look for the Wi-Fi network name of the projector. It should be listed as "Luqeeg Projector" or something similar.
4. Select the projector's Wi-Fi network and enter the password if prompted. The default password is usually provided in the projector's user manual.
5. Once connected, open the desired app or content on your smartphone or tablet.
6. The content should now be mirrored or streamed to the projector's display.
If you are unable to establish a connection, please try the following troubleshooting steps:
1. Ensure that the projector and your smartphone or tablet are within range of the Wi-Fi network. Move closer to the projector if necessary.
2. Double-check that you have entered the correct password for the projector's Wi-Fi network. If you're unsure, refer to the user manual or contact Luqeeg customer support for assistance.
3. Restart both the projector and your smartphone or tablet. Sometimes, a simple restart can resolve connectivity issues.
4. If the issue persists, try resetting the projector's Wi-Fi settings. Refer to the user manual for instructions on how to reset the Wi-Fi settings.
5. If none of the above steps work, there may be compatibility issues between your device and the projector. Ensure that your smartphone or tablet meets the minimum requirements for wireless connectivity with the projector.
If you continue to experience difficulties, it is recommended to reach out to Luqeeg customer support for further assistance. They will be able to provide specific troubleshooting steps based on your device and the projector model.
Add New Comment