User Manual Q&AAnswer
Nov 10, 2024 - 10:08 PM
To connect your laptop to the Lumens DC190 Portable Camera SXGA with Mic Projector, please follow these steps:
1. Make sure the projector and your laptop are powered off.
2. Locate the HDMI or VGA cable included in the box.
3. Connect one end of the HDMI or VGA cable to the corresponding port on your laptop.
4. Connect the other end of the HDMI or VGA cable to the HDMI or VGA input port on the projector.
5. Power on your laptop and the projector.
6. On your laptop, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display settings" or "Graphics options."
7. In the display settings, select the option to extend or duplicate your laptop's display to the projector. This may vary depending on your operating system.
8. Adjust the focus and position of the projected image using the projector's controls if needed.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the Lumens DC190 Portable Camera SXGA with Mic Projector.
Add New Comment