User Manual Q&AAnswer
Nov 10, 2024 - 09:52 PM
To connect your laptop to the N-one Multimedia Video Projector, please follow these steps:
1. Make sure both your laptop and the projector are powered off.
2. Locate the HDMI cable included in the box.
3. Connect one end of the HDMI cable to the HDMI port on your laptop.
4. Connect the other end of the HDMI cable to either the HDMI 1 or HDMI 2 port on the projector.
5. Power on the projector and your laptop.
6. Use the remote control to navigate the projector's menu and select the HDMI input as the video source.
7. Your laptop's screen should now be mirrored or extended onto the projector's display.
If your laptop does not have an HDMI port, you can use a VGA cable instead. Follow the same steps, but connect the VGA cable to the VGA port on your laptop and the VGA port on the projector. Additionally, you may need to adjust your laptop's display settings to ensure the correct resolution and screen arrangement.
Please refer to the user manual for more detailed instructions and troubleshooting tips specific to your laptop model and operating system.
Add New Comment