User Manual Q&AAnswer
Nov 10, 2024 - 09:36 PM
To connect your laptop to the BHVXW 4K LED Video Projector, you can follow these steps:
1. Check the available ports on your laptop and the projector. The BHVXW projector offers multiple connectivity options, including HDMI, USB, and VGA.
2. Determine which port on the projector matches the port on your laptop. For example, if your laptop has an HDMI port, you can use an HDMI cable to connect it to the HDMI port on the projector.
3. Plug one end of the appropriate cable (HDMI, USB, or VGA) into the corresponding port on your laptop.
4. Plug the other end of the cable into the corresponding port on the BHVXW projector. Make sure the connections are secure.
5. Turn on your laptop and the projector.
6. On your laptop, go to the display settings and select the appropriate display mode. This may vary depending on your operating system, but you can usually find it in the Control Panel or System Preferences.
7. Choose the option to extend or duplicate your laptop's display to the projector. This will allow you to see your laptop's screen on the projector.
8. Adjust the projector's focus and keystone correction, if necessary, to ensure a clear and aligned image.
9. Play your desired content on your laptop, and it should be projected onto the screen or wall through the BHVXW projector.
Note: For more specific instructions and troubleshooting tips, please refer to the BHVXW 4K LED Video Projector user manual.
Add New Comment