User Manual Q&AAnswer
Nov 10, 2024 - 09:19 PM
To connect your mobile device wirelessly to the EUG SP-05 Wireless Home Theater Projector for streaming, follow these steps:
1. Ensure that both your mobile device and the projector are connected to the same Wi-Fi network.
2. On the projector, navigate to the settings menu using the remote control or on-device buttons.
3. Look for the wireless connectivity options and select "Wi-Fi" or "Wireless".
4. The projector will scan for available Wi-Fi networks. Select your network from the list and enter the password if prompted.
5. Once connected to the Wi-Fi network, go to your mobile device's settings and enable Wi-Fi.
6. From your mobile device, open the screen mirroring or casting feature. The exact location of this feature may vary depending on your device's operating system (e.g., Android, iOS).
7. Your mobile device will scan for available devices to connect to. Select the EUG SP-05 projector from the list.
8. After selecting the projector, your mobile device's screen will be mirrored on the projector, allowing you to stream content wirelessly.
Note: The specific steps may vary slightly depending on the operating system and version of your mobile device. Refer to the user manual for your device if you encounter any difficulties.
For more detailed instructions and troubleshooting tips, please refer to the EUG SP-05 Wireless Home Theater Projector User Manual provided.
Add New Comment