User Manual Q&AAnswer
Nov 10, 2024 - 08:51 PM
Installing the Theater Solutions TST87 in-Wall in-Ceiling Speaker Set is a straightforward process. Here are the step-by-step instructions:
1. Placement: Carefully plan the placement of your speakers. Determine the ideal locations on your walls or ceiling for optimal sound distribution. Ensure they are mounted or installed securely.
2. Wiring: Connect the speakers to your audio source (e.g., AV receiver) using the provided spring-loaded raw wire connectors. Ensure that the wiring is properly connected with the correct polarity. Typically, the red wire should connect to the positive terminal, and the black wire should connect to the negative terminal on both the speakers and the amplifier or receiver.
3. Calibration: Access the settings on your audio receiver or amplifier to calibrate the speakers properly. Use the receiver's built-in calibration or room correction system, if available, to optimize sound quality and balance. Adjust the speaker levels and channel settings to ensure that the sound output from each speaker is balanced and suits your preferences.
4. Subwoofer Amps (for TS1000 Subwoofers): If you are using the TS1000 in-wall passive subwoofer speakers, you'll need to connect separate amplifiers to power them. Ensure that the subwoofer amps are compatible with the subwoofers' specifications.
5. Testing: After installation and calibration, test your audio system with various types of audio content to ensure it performs as expected. Check for any unwanted vibrations or resonances that may be caused by the speakers' mounting or placement.
6. Fine-Tuning: Depending on your room's acoustics and personal preferences, you may need to fine-tune the speaker settings further. This can include adjusting equalization (EQ) settings on your receiver.
Please refer to the Theater Solutions TST87 in-Wall in-Ceiling Speaker User Manual for more detailed instructions and illustrations.
Add New Comment