Answer
Nov 10, 2024 - 08:03 PM
To connect the NUOPAIPLUS C9 Professional Audio Mixer to your computer for recording, follow these steps:
1. Ensure that your computer is powered on and running the appropriate recording software.
2. Locate the USB data cable included in the box with the mixer.
3. Connect one end of the USB data cable to the USB port on the NUOPAIPLUS C9 Professional Audio Mixer.
4. Connect the other end of the USB data cable to an available USB port on your computer.
5. Once the mixer is connected to your computer, it should be recognized as an audio input device. You may need to select it as the input source within your recording software.
6. Set the appropriate input levels on the mixer by adjusting the gain knobs for each channel. Monitor the meters on the mixer to prevent audio clipping.
7. Start your recording software and select the NUOPAIPLUS C9 Professional Audio Mixer as the input device.
8. Begin recording your audio by pressing the appropriate record button within your recording software.
Note: It is important to consult the user manual of your specific recording software for detailed instructions on setting up and configuring audio input devices.
For further assistance or troubleshooting, refer to the NUOPAIPLUS C9 Professional Audio Mixer User Manual or contact the manufacturer's customer support.
Add New Comment