User Manual Q&AAnswer
Nov 09, 2024 - 05:54 AM
To connect microphones to the NUOPAIPLUS SK500 Professional Audio Mixer, follow these steps:
1. Locate the XLR inputs on the mixer. These inputs are typically labeled with numbers or letters corresponding to each channel.
2. Take an XLR cable and connect one end to the XLR output of your microphone. The XLR output is usually located at the bottom of the microphone.
3. Connect the other end of the XLR cable to the corresponding XLR input on the mixer. Ensure that you match the numbers or letters on the microphone and mixer inputs to ensure proper channel assignment.
4. Repeat this process for each microphone you want to connect, using separate XLR cables for each microphone.
5. Once all the microphones are connected, adjust the gain levels for each channel on the mixer. The gain controls are usually located near the XLR inputs and allow you to adjust the input sensitivity of each microphone. Start with the gain set to a low level and gradually increase it until you achieve the desired audio level without any distortion.
6. You can now use the mixer to control the audio levels and apply any desired effects or processing to the microphone inputs.
For more detailed instructions and information on using the NUOPAIPLUS SK500 Professional Audio Mixer, refer to the user manual provided with the product.
Add New Comment