Answer
Nov 09, 2024 - 05:51 AM
To install the NEC SB-01HC HD/SD-SDI Internal OPS Card onto a monitor or projector, please follow these steps:
1. Refer to the operating instructions of your specific monitor or projector for detailed instructions on how to mount the board. Some monitors may require the use of the SB-02 AM optional adapter.
2. Use 75 coaxial cables with a thickness and performance of 5C-FB or greater for the connection. BNC connectors should be used for the connection.
3. Ensure that the top side of the board is facing the rear of the display when installing it. Inserting it with the wrong orientation may cause damage to the board and the display.
4. Once the board is properly mounted, you can connect the SDI signal source to the input terminal (SDI BNC) of the board.
5. If you want to monitor the input signal, you can use the loop-through output terminal (SDI BNC) of the board to connect to another device.
Please note that the quality of the cables used for connection can affect the signal, so it is recommended to use high-quality coaxial cables for optimal performance.
For more detailed instructions and specifications, please refer to the provided operating instructions manual for the NEC SB-01HC HD/SD-SDI Internal OPS Card.
Add New Comment