Answer
Nov 09, 2024 - 05:30 AM
To sync the wireless microphones to the receiver in the VocoPro Commander Wireless Microphone System, please follow these steps:
1. Make sure the receiver and microphones are powered on and within range of each other.
2. On the receiver, press and hold the Power/Sync button until the RF LED starts flashing.
3. On the microphone, press and hold the Power/Sync button until the AF LED starts flashing.
4. Release both buttons and wait for the RF LED on the receiver to stop flashing and stay solid.
5. The microphone is now synced to the receiver and ready to use.
Note: If you have multiple microphones, repeat the syncing process for each microphone individually.
For more detailed instructions and troubleshooting tips, please refer to the VocoPro Commander Wireless Microphone System User Manual.
Add New Comment