User Manual Q&AAnswer
Nov 09, 2024 - 05:08 AM
To connect the ZealSound K66 Series USB Condenser Microphone to your computer, follow these steps:
1. Locate an available USB port on your computer.
2. Take the provided USB cable and connect one end to the USB port on your computer.
3. Connect the other end of the USB cable to the USB port on the ZealSound K66 Series microphone.
4. Once the microphone is connected to your computer, it should be recognized as an audio input device.
5. Open your preferred recording or streaming software on your computer.
6. In the software settings, select the ZealSound microphone as the input source for audio recording.
7. Adjust the gain control on the microphone to achieve the desired audio input level. Lower the gain for quieter sounds and raise it for louder sources.
8. You are now ready to use the ZealSound K66 Series USB Condenser Microphone for recording or streaming on your computer.
Please refer to the user manual for additional information and troubleshooting tips.
Add New Comment