User Manual Q&AAnswer
Nov 09, 2024 - 04:58 AM
To connect the SJYDQ DM 202 Wired Microphone to your audio system or mixer, follow these steps:
1. Locate the designated microphone input on your audio system or mixer. This input is typically labeled as "Mic In" or "Microphone."
2. Take the provided cable that came with the microphone and connect one end to the microphone's output connector. The SJYDQ DM 202 usually has a 3.5mm jack connector.
3. Connect the other end of the cable to the microphone input on your audio system or mixer. Ensure a secure connection by firmly inserting the connector into the corresponding jack.
4. Once the microphone is properly connected, you can adjust the microphone's position and distance from the sound source (e.g., vocalist or instrument) to capture the desired audio.
Note: If your microphone incorporates an on/off switch, remember to activate it when planning to use the microphone and deactivate it when finished to conserve battery life (if applicable).
For more detailed instructions and illustrations, please refer to the user manual provided with the SJYDQ DM 202 Wired Microphone.
Add New Comment