Answer
Nov 09, 2024 - 04:45 AM
Here are the step-by-step instructions for using the Conair GS2WB Handheld Travel Garment Steamer:
1. Ensure that the garment steamer is unplugged before starting.
2. Twist the steamer head counterclockwise and lift it to remove it from the main body of the steamer.
3. Fill the reservoir with distilled water up to the max fill line. Do not overfill.
4. Replace the steamer head on the steamer body by twisting it clockwise into the locked position.
5. Place the appliance on a flat surface in an upright position.
6. Plug the steamer into an electrical outlet.
7. Press the ON/OFF button to the ON position. The green POWER light will illuminate.
8. After about a minute, the steamer will begin to emit a continuous flow of steam from the steam vents. This indicates that the garment steamer is ready for use.
9. Hold the steamer by its handle when using it. Do not grasp the body of the unit while steaming garments or while the unit is hot.
10. Hold the fabric taut and direct the flow of steam toward the garment to remove wrinkles. Do not touch the fabric with the steam head.
11. The approximate runtime is 5 minutes per fill-up. For best results, maintain an upright position when using the steamer.
Remember to always follow the safety instructions provided in the manual and exercise caution when using the steamer to avoid burns or other injuries.
Add New Comment