User Manual Q&AAnswer
Nov 09, 2024 - 04:19 AM
To connect a microphone to the Powerwerks PW50 Black PA System, follow these steps:
1. Locate the INPUT SECTION on the control panel of the PW50.
2. Identify the MIC Inputs, which are XLR inputs designed for low-impedance microphones.
3. Plug the microphone into one of the MIC Inputs using an XLR cable.
4. Make sure the microphone is turned on and adjust its volume if necessary.
5. Use the volume control for the corresponding channel to adjust the microphone's volume level.
Note: The PW50 provides 15-volt phantom power to the MIC Inputs, which is used to power condenser microphones. If you are using a dynamic or non-condenser microphone, the phantom power will not cause any damage.
For more detailed information and illustrations, please refer to the Powerwerks PW50 Black PA System Owners Manual.
Add New Comment