User Manual Q&AAnswer
Nov 09, 2024 - 03:49 AM
Connecting the POLSEN HDM-16-S microphone to your audio equipment is a straightforward process. Here are the steps:
1. Locate the XLR connector on the microphone. It is a three-pin connector commonly used in the audio industry.
2. Identify the XLR input on your audio equipment, such as an amplifier or mixer. It is usually labeled as "MIC" or "XLR."
3. Take the XLR cable included with the microphone and connect one end to the XLR connector on the microphone itself.
4. Connect the other end of the XLR cable to the XLR input on your audio equipment. Ensure a secure fit by firmly pushing the connector into the input.
5. Once connected, your POLSEN HDM-16-S microphone is ready to use with your audio equipment. Make sure to configure your audio equipment to recognize the microphone as the audio input source.
Please refer to the user manual for any additional information or troubleshooting tips regarding the connection process.
Add New Comment