User Manual Q&AAnswer
Nov 09, 2024 - 03:36 AM
To connect the Fico ZUDM326M Uni-Directional Microphone to your computer, you will need an audio interface or mixer that has an XLR input. Here are the step-by-step instructions:
1. Locate the XLR connector on the microphone cable. The XLR connector has three pins and is commonly used for professional audio equipment.
2. Plug the XLR connector into the XLR input on your audio interface or mixer. Make sure it is securely connected.
3. Connect the other end of the microphone cable to the corresponding XLR input on your audio interface or mixer.
4. Once the microphone is connected, you may need to adjust the input gain on your audio interface or mixer. This will control the microphone's sensitivity level. Consult the user manual of your audio interface or mixer for instructions on adjusting the input gain.
5. If you want to monitor the audio while recording, connect a pair of headphones to the headphone output on your audio interface or mixer.
6. Open your chosen recording software on your computer. In the software settings, select the Fico ZUDM326M microphone as the input source.
7. Start recording within your software to capture the audio signal from the microphone.
8. After recording, remember to power off the microphone and disconnect it from the audio interface or mixer.
Please refer to the Fico ZUDM326M Uni-Directional Microphone User Manual for more detailed instructions and troubleshooting tips.
Add New Comment