How do I connect the SevenStars LM70S Moving Head DJ Lights to a DMX controller? (SevenStars LM70S Moving Head DJ Lights User Manual)

Answer

manuals.plus

Nov 09, 2024 - 03:30 AM


To connect the SevenStars LM70S Moving Head DJ Lights to a DMX controller, follow these steps:

1. Ensure that both the lights and the DMX controller are powered off before making any connections.

2. Locate the DMX input and output ports on the lights. These ports are usually labeled "DMX IN" and "DMX OUT" or "DMX XLR" ports.

3. Connect one end of a DMX cable to the DMX output port of the DMX controller.

4. Connect the other end of the DMX cable to the DMX input port of the first LM70S Moving Head DJ Light.

5. If you have multiple lights, connect a DMX cable from the DMX output port of the first light to the DMX input port of the second light. Repeat this step for any additional lights, daisy-chaining them together using DMX cables.

6. Once all the lights are connected in a daisy-chain, connect the last light's DMX output port to the DMX input port of the DMX controller using another DMX cable.

7. Power on the lights and the DMX controller.

8. Set the DMX address on each LM70S Moving Head DJ Light. Refer to the user manual for instructions on how to set the DMX address. Each light should have a unique DMX address to ensure individual control.

9. Configure the DMX controller to send the appropriate DMX signal to control the lights. Consult the DMX controller's user manual for instructions on programming and controlling DMX devices.

10. Test the connection by sending DMX signals from the controller to the lights. Adjust the DMX controller's settings to control various lighting parameters such as color, gobo, pan, tilt, and more.

Note: Make sure to use high-quality DMX cables and ensure that the DMX addresses are correctly set to avoid any communication issues between the lights and the DMX controller.