Answer
Nov 09, 2024 - 03:23 AM
To connect the AKG CHM99 microphone to an audio mixer, you will need an XLR cable and an audio mixer with phantom power. Here are the steps to follow:
1. Locate the XLR input on your audio mixer. This is usually labeled as "MIC" or "XLR" and is typically found on the back or front panel of the mixer.
2. Take one end of the XLR cable and plug it into the XLR output on the AKG CHM99 microphone. The XLR output is located at the bottom of the microphone.
3. Take the other end of the XLR cable and plug it into the XLR input on the audio mixer.
4. Make sure the audio mixer is turned off or the channel corresponding to the XLR input is muted before connecting the microphone.
5. Once the cable is securely connected, turn on the audio mixer and ensure that phantom power is enabled. Phantom power is necessary for the AKG CHM99 microphone to function properly.
6. Adjust the volume or gain control on the audio mixer for the channel connected to the microphone. Start with a low volume and gradually increase it until you achieve the desired sound level.
7. You can now use the output controls on the audio mixer to adjust the overall volume of the microphone.
For more detailed information and troubleshooting tips, refer to the AKG CHM99 Hanging Cardioid Condenser Microphone Quick Start Guide provided with the product.
Add New Comment