User Manual Q&AAnswer
Nov 09, 2024 - 03:15 AM
To fill the water reservoir of the SF-680, follow these steps:
1. Place the steam press on a flat, level surface.
2. Turn the locking xxxx to the "Unlock" position to unlock the pressing plate.
3. Lift up the pressing plate using the handle. It will automatically stay in the lifted position.
4. Pull the water reservoir out. Note that the reservoir cannot be completely removed from the unit, so do not force it.
5. Remove the water reservoir cap to expose the fill hole.
6. Use the included measuring cup to fill the water reservoir with distilled water up to the MAX (300 ml) line.
7. Replace the water reservoir cap and push the filled reservoir back into the main unit.
It is important to have water in the reservoir for the steam burst function to work correctly.
Add New Comment