Answer
Nov 09, 2024 - 02:21 AM
To fill the water tank of the TFIIEXFL Ironing Machine, please follow these steps:
1. Make sure the ironing machine is turned off and unplugged.
2. Locate the water tank, which is usually located at the back or side of the machine.
3. Remove the water tank by gently pulling it out or twisting it counterclockwise, depending on the design.
4. Fill the water tank with clean water. It is recommended to use tap water, as the machine does not require distilled water.
5. Do not overfill the tank. Fill it up to the maximum water level indicated on the tank or as instructed in the user manual.
6. Carefully reinsert the water tank back into its place, ensuring it is securely attached.
7. Plug in the ironing machine and turn it on. The water will be used for steam generation during ironing.
Please refer to the "Water Filling" section of the user manual for more specific instructions and illustrations if needed.
Add New Comment