User Manual Q&AAnswer
Nov 09, 2024 - 02:19 AM
To connect the Jammin Pro MIC017 Dynamic Microphone to your audio interface or mixer, follow these steps:
1. Locate the XLR connector on the microphone cable. This is the three-pin connector that resembles a rounded triangle shape.
2. Identify the suitable input on your audio interface or mixer. It should have an XLR input labeled "MIC" or "Microphone."
3. Insert the microphone's XLR connector into the XLR input on your audio interface or mixer. Make sure it is firmly inserted to ensure a secure connection.
4. If your microphone requires phantom power, check if your audio interface or mixer has a phantom power switch. Activate phantom power if necessary. Note that the Jammin Pro MIC017 is a dynamic microphone and does not require phantom power.
5. Once the microphone is connected, position it about 2-6 inches in front of the sound source, such as your mouth for vocals or in front of a musical instrument. Experiment with placement to find the optimal position for capturing sound.
6. To fine-tune the input gain, perform a sound check. Speak or sing into the microphone and adjust the input gain on your mixer or audio interface until you achieve an appropriate level without distortion.
7. If available, use headphones or studio monitors to monitor the microphone's output in real-time. This allows you to make any necessary adjustments during performances or recording sessions.
Remember to disconnect the microphone and store it safely when not in use to prevent any damage. For further details or troubleshooting, refer to the Jammin Pro MIC017 Dynamic Microphone user manual.
Add New Comment