User Manual Q&AAnswer
Nov 09, 2024 - 02:14 AM
To connect the Generic 5687945 Stereo Audio Mixer with Wired Microphone to your computer for recording, follow these steps:
1. Ensure that your computer is turned on and the audio mixer is powered off.
2. Locate the USB port on the audio mixer and the USB port on your computer.
3. Connect one end of the included USB cable to the USB port on the audio mixer.
4. Connect the other end of the USB cable to the USB port on your computer.
5. Power on the audio mixer.
6. On your computer, open your preferred recording software or digital audio workstation (DAW).
7. In the recording software, select the audio mixer as the input device for recording. This may involve accessing the software's settings or preferences menu.
8. Set the desired input levels on the audio mixer by adjusting the input gain controls for each channel. This ensures that the audio signal is neither too loud nor too quiet.
9. Start recording in your software and monitor the audio levels on the audio mixer's LED VU meters to ensure optimal recording levels.
10. After recording, you can playback and edit the recorded audio in your software.
Please refer to the user manual for more detailed instructions and troubleshooting tips specific to your setup.
Add New Comment