Answer
Nov 09, 2024 - 01:32 AM
To connect the Monolith C4 Center Channel Speaker to your AV receiver or amplifier, follow these steps:
1. Obtain speaker wire of appropriate length.
2. Identify the binding posts on the back of the speaker. They are labeled with red and black indicators for positive and negative connections.
3. Strip a small portion of insulation from the ends of the speaker wire.
4. Insert the stripped ends of the speaker wire into the corresponding binding posts on the speaker. Ensure that the positive (+) wire is connected to the red binding post and the negative (-) wire is connected to the black binding post.
5. Tighten the binding posts to secure the speaker wire connections. Ensure they are snug but not overly tightened to avoid damaging the wire.
6. Locate the speaker outputs on your AV receiver or amplifier. They are typically labeled as "Center" or "C" and may be color-coded.
7. Connect the other end of the speaker wire to the corresponding speaker outputs on your AV receiver or amplifier. Again, match the positive (+) and negative (-) connections.
8. Ensure the connections are secure and tight to prevent audio distortion.
9. Repeat the process for any additional speakers in your setup.
Refer to the Monolith 143160 C4 Center Channel Speaker User Manual for any specific instructions or illustrations related to connecting the speaker to your AV receiver or amplifier.
Add New Comment