User Manual Q&AAnswer
Nov 09, 2024 - 12:56 AM
To connect the Yamaha NS-SW100 subwoofer to your audio system, please follow these steps:
1. Locate the subwoofer output on your receiver or amplifier. This is usually labeled as "Sub Out" or "LFE Out."
2. Connect one end of the subwoofer cable (included in the box) to the subwoofer output on your receiver or amplifier.
3. Connect the other end of the subwoofer cable to the "Subwoofer Input" on the back of the Yamaha NS-SW100 subwoofer. The subwoofer input is usually labeled as "LFE In" or "Sub In."
4. Make sure the subwoofer is powered on and set to the desired volume level.
5. Adjust the crossover frequency on your receiver or amplifier to match the capabilities of the Yamaha NS-SW100. The crossover frequency determines the point at which the subwoofer takes over the bass frequencies from the main speakers. Consult your receiver or amplifier's manual for instructions on how to adjust the crossover frequency.
6. Play some audio through your system and listen for the presence of bass coming from the subwoofer. If you don't hear any bass, check the connections and make sure the subwoofer is properly powered on.
For more detailed instructions and illustrations, please refer to the Owner's Manual of the Yamaha NS-SW100 subwoofer. You can find the Owner's Manual in the provided link.
Add New Comment