User Manual Q&AAnswer
Nov 09, 2024 - 12:49 AM
To connect the Monolith B5 Bookshelf Speaker, follow these steps:
1. Use high-quality speaker cables: Ensure that you have high-quality speaker cables that are suitable for your audio system.
2. Identify the positive and negative terminals: On the back of the speaker, you will find binding posts labeled as positive (+) and negative (-). These terminals are used to connect the speaker to your audio system.
3. Connect the speaker cables: Strip the ends of your speaker cables to expose the bare wire. Insert the positive wire into the positive terminal and the negative wire into the negative terminal. Make sure to connect positive to positive and negative to negative for consistent phasing.
4. Secure the connections: Tighten the binding posts to secure the speaker cables in place. Ensure that the connections are tight but not overly tightened to avoid damaging the terminals.
5. Repeat for the other speaker: If you have a pair of Monolith B5 Bookshelf Speakers, repeat the above steps to connect the second speaker to your audio system.
6. Connect to your audio system: Once both speakers are connected, you can now connect the speaker cables to your audio system. Refer to your audio system's manual for instructions on connecting external speakers.
By following these steps, you should be able to properly connect the Monolith B5 Bookshelf Speaker to your audio system and start enjoying its high-performance sound.
Add New Comment