User Manual Q&AAnswer
Nov 09, 2024 - 12:32 AM
The Conair 124ANP 1600W Compact Hair Dryer is equipped with dual voltage capabilities for worldwide travel. To adjust the voltage for international use, follow these steps:
1. Confirm the voltage available at your destination: Before using the hair dryer in a different country, make sure to check the voltage available at each overseas location. This information can usually be found in travel guides or by contacting the hotel or accommodation you will be staying at.
2. Set the dual voltage switch: The dual voltage switch is located on the hair dryer. For use in the U.S.A., the voltage selector switch should be placed in the 125 position. For use in several countries overseas, the voltage selector may need to be placed in the 250 positions. Use a small coin or a paperclip to turn the switch so that the arrow points at the desired voltage setting.
3. Use the appropriate plug adapter: If you are connecting the hair dryer to a 250-volt supply, you will need to use an attachment plug adapter of the proper configuration for the power supply receptacle in that country. This will ensure that the hair dryer can be plugged into the outlet correctly.
It is important to note that when operating the hair dryer on 220-250V, the speed switch should be set to Low and the heat switch should be set to Hot. The switches must remain in the Low (on speed switch), Hot (on heat switch), and 250 positions. Do not attempt to operate/change the setting on the speed and heat switches or change to the 125 position when operating on 220-250V.
Always refer to the instruction manual for specific details and guidelines on adjusting the voltage for international use.
Add New Comment