User Manual Q&AAnswer
Nov 09, 2024 - 12:07 AM
To connect the Fluance XL8F speakers to your amplifier or receiver, follow these steps:
1. Gather high-quality speaker wires: You will need speaker wires to establish the connection between the speakers and your amplifier or receiver. The type of speaker wire may vary depending on the specifications of your amplifier or receiver.
2. Identify the terminals: Locate the corresponding terminals on the back of each XL8F speaker. The terminals are typically labeled as "+" and "-".
3. Strip the speaker wire: Strip a small portion of insulation from the ends of your speaker wire to expose the bare wire.
4. Connect the wires: Insert the bare wire into the corresponding terminals on the back of each speaker. Make sure to match the polarity correctly, connecting the "+" terminal on the speaker to the "+" terminal on your amplifier or receiver, and the "-" terminal to the "-".
5. Secure the connection: Tighten any screws or clamps on the terminals to ensure a secure connection between the speaker wire and the speakers.
6. Repeat for the other speaker: Repeat the above steps for the second XL8F speaker, connecting it to the appropriate terminals on your amplifier or receiver.
7. Power on and test: Turn on your amplifier or receiver and set it to the appropriate input for testing. Play some audio tracks to test the sound quality and balance. You may also use specific audio calibration tracks to fine-tune your system.
By following these steps, you should be able to successfully connect your Fluance XL8F speakers to your amplifier or receiver and enjoy their immersive audio performance. For more detailed instructions, refer to the instruction manual provided with the speakers.
Add New Comment