User Manual Q&AAnswer
Nov 08, 2024 - 11:48 PM
To pair your Bluetooth device (e.g., smartphone, tablet) with the Pyle PDWRBT46WT speakers, follow these steps:
1. Ensure that Bluetooth is enabled on your device: Go to the settings menu on your device and locate the Bluetooth settings. Enable Bluetooth if it is not already turned on.
2. Put the speakers in pairing mode: Press and hold the dedicated Bluetooth or pairing button on the speakers. This button is usually located on the control panel or near the Bluetooth indicator light. Keep holding the button until the Bluetooth indicator light starts flashing, indicating that the speakers are in pairing mode.
3. Search for available Bluetooth devices on your device: On your smartphone or tablet, go to the Bluetooth settings menu and search for available devices. The Pyle PDWRBT46WT speakers should appear in the list of available devices as "Pyle PDWRBT46WT". Select this option to establish the Bluetooth connection.
4. Complete the pairing process: Once you select the Pyle PDWRBT46WT speakers on your device, the pairing process will begin. Wait for a few moments while the devices establish the connection. Once the pairing is successful, the Bluetooth indicator light on the speakers will stop flashing and remain solid.
5. Start streaming audio wirelessly: With the Bluetooth connection established, you can now play audio from your device, and it will be wirelessly streamed to the Pyle PDWRBT46WT speakers. Adjust the volume on both your device and the speakers to your desired levels.
Note: If you have previously paired the speakers with another device, you may need to clear the pairing history on the Pyle PDWRBT46WT speakers before attempting to pair with a new device. Refer to the user manual for instructions on clearing the pairing history if needed.
For more detailed instructions and troubleshooting tips, please refer to the Pyle PDWRBT46WT Bluetooth Speaker System user manual.
Add New Comment