User Manual Q&AAnswer
Nov 08, 2024 - 11:06 PM
To connect SHEHDS DMX512 Moving Head Spotlights to a DMX controller, follow these steps:
1. Ensure that you have a DMX controller and DMX cables available.
2. Locate the DMX input on the Moving Head Spotlight. It is usually labeled as "DMX IN" or "DMX INPUT."
3. Connect one end of a DMX cable to the DMX output of your DMX controller.
4. Connect the other end of the DMX cable to the DMX input on the Moving Head Spotlight.
5. Repeat steps 3 and 4 for each Moving Head Spotlight you want to connect to the DMX controller.
6. Once all the fixtures are connected, power on the DMX controller and the Moving Head Spotlights.
7. Set the DMX address of each Moving Head Spotlight to match the address settings on the DMX controller. Refer to the user manual for instructions on how to set the DMX address.
8. Test the connection by sending DMX signals from the controller to the Moving Head Spotlights. Use the controller's functions to control the pan, tilt, colors, gobos, and other lighting effects of the fixtures.
Note: It is important to ensure that the DMX controller and Moving Head Spotlights are on the same DMX universe and that each fixture has a unique DMX address. Consult the user manual for specific instructions on addressing and controlling the Moving Head Spotlights with your DMX controller.
Add New Comment