User Manual Q&AAnswer
Nov 08, 2024 - 10:33 PM
Connecting the EVID6.2TW Surface-Mount Speaker System to an amplifier is a straightforward process. Here's a step-by-step guide:
1. Ensure that both the speaker system and the amplifier are turned off and unplugged from the power source.
2. Locate the spring terminals on the back of each speaker. These terminals are used for connecting the speaker wires.
3. Strip the insulation from the ends of your speaker wires to expose the bare wire.
4. Identify the positive (+) and negative (-) terminals on the amplifier. These are usually labeled or color-coded.
5. Take the positive (+) wire from one speaker and connect it to the positive (+) terminal on the amplifier. Insert the bare wire into the spring terminal and make sure it is securely fastened. Repeat this step for the negative (-) wire, connecting it to the negative (-) terminal on the amplifier.
6. Repeat step 5 for the second speaker, ensuring that you connect the positive (+) and negative (-) wires to the corresponding terminals on the amplifier.
7. Once all the connections are made, double-check that the wires are securely fastened and there are no loose connections.
8. After confirming the connections, plug in both the speaker system and the amplifier to their respective power sources.
9. Turn on the amplifier and adjust the volume to a low level.
10. Gradually increase the volume to test the sound output from the EVID6.2TW speakers. If you experience any distortion or issues, lower the volume and recheck the connections.
By following these steps, you should be able to successfully connect the EVID6.2TW Surface-Mount Speaker System to your amplifier and enjoy its exceptional audio performance. For more detailed instructions, refer to the user manual provided with the speaker system.
Add New Comment