Answer
Nov 08, 2024 - 10:24 PM
To connect the Fluance HF51BR Loudspeaker system to your amplifier or receiver, follow these steps:
1. Ensure that your amplifier or receiver is turned off before making any connections.
2. Use high-quality speaker cables to connect the loudspeakers to the appropriate terminals on your amplifier or receiver. Make sure to match the positive (+) and negative (-) terminals on both the speaker and the amplifier.
3. For each loudspeaker, locate the speaker terminals on the back of your amplifier or receiver. These terminals are usually labeled as "Speaker Out" or "Speaker Output."
4. Insert the positive (+) end of the speaker cable into the corresponding positive (+) terminal on the amplifier or receiver. The positive terminal is usually marked with a red color or a "+" symbol.
5. Insert the negative (-) end of the speaker cable into the corresponding negative (-) terminal on the amplifier or receiver. The negative terminal is usually marked with a black color or a "-" symbol.
6. Repeat steps 3-5 for each loudspeaker in the system, ensuring that you connect the left and right channels correctly.
7. If your system includes the DB10 Subwoofer, you can connect it using either an RCA cable or speaker wire, depending on your amplifier or receiver's capabilities. Consult the subwoofer's manual for specific instructions on connecting it to your amplifier or receiver.
8. Once all connections are secure, turn on your amplifier or receiver, followed by the subwoofer.
9. Adjust the volume to a moderate level to test the speakers.
Note: It's important to refer to your amplifier or receiver's manual for any specific instructions or settings related to speaker connections.
Add New Comment