User Manual Q&AAnswer
Nov 08, 2024 - 10:23 PM
To connect the Bogen MB8TSLVR Metal Box Speaker to an amplifier, follow these steps:
1. Identify the type of amplifier system you have: The Bogen MB8TSLVR is compatible with both 25V and 70V amplifier systems.
2. Determine the desired wattage: The speaker offers multiple wattage taps at 4, 2, 1, 1/2, 1/4, and 1/8 watts. Choose the appropriate wattage based on your amplifier's output and the desired sound level.
3. Locate the speaker wire connections on the back of the speaker: The speaker will have labeled terminals for connecting the speaker wires.
4. Strip the ends of the speaker wires: Remove a small portion of insulation from the ends of the speaker wires to expose the bare wire.
5. Connect the speaker wires to the desired wattage tap: Match the positive (+) and negative (-) terminals on the speaker with the corresponding terminals on the amplifier. Ensure a secure and firm connection.
6. Double-check all connections: Make sure all connections are tight and secure to prevent any audio disturbances.
7. Power on the amplifier: Once the speaker is connected, turn on your amplifier.
8. Test the speaker: Play a soundtrack or audio source through the amplifier to test the speaker. Adjust the volume and settings as needed.
Note: If you are unsure about any of the steps or need further assistance, it is recommended to consult the user manual provided with the Bogen MB8TSLVR Metal Box Speaker for specific instructions and diagrams.
Add New Comment