User Manual Q&AAnswer
Nov 08, 2024 - 10:20 PM
To connect the Bose 161 stereo speakers to your receiver or amplifier, follow these steps:
1. Turn off your receiver or amplifier and unplug it from the outlet.
2. Prepare the speaker cord by stripping approximately 1/2 inch (1.3 cm) of insulation from both wires at the ends of each cord.
3. Locate the terminals on the back of each speaker. Depress the red terminal button and insert the marked (+) wire. Release the button. Depress the black terminal button and insert the plain (–) wire. Release the button.
4. Connect the left speaker cord to the left channel speaker output of your receiver or amplifier. Attach the marked wire to the red (+) terminal and the plain wire to the black (–) terminal. Repeat this step for the right speaker cord and the right channel speaker output.
5. Make sure no loose strands of wire touch across terminals to avoid a short circuit.
6. Secure any loose wires before plugging in the receiver or amplifier.
For more detailed instructions and illustrations, please refer to pages 4-5 of the Bose 161 stereo speaker system User Manual.
Add New Comment