User Manual Q&AAnswer
Nov 08, 2024 - 09:51 PM
To pair the wireless microphones with the receiver in the Bolymic 2900 system, follow these steps:
1. Make sure the microphone and receiver are both powered off before starting the pairing process.
2. Locate the synchronization button or switch on both the microphone and receiver. Refer to the user manual for the specific location of these controls.
3. Power on the receiver and wait for it to initialize. The receiver may display a "Ready" or "Sync" indicator when it is ready to pair.
4. Power on the microphone and bring it close to the receiver. Press and hold the synchronization button or switch on the microphone.
5. While holding the synchronization button or switch on the microphone, press the synchronization button or switch on the receiver. The receiver may have an LED indicator that blinks or changes color to indicate the pairing process.
6. Release the synchronization buttons or switches on both the microphone and receiver. The microphone should now be paired with the receiver.
7. Repeat the above steps for any additional microphones you want to pair with the receiver.
Note: It's important to follow the specific instructions provided in the user manual for your Bolymic 2900 system, as the pairing process may vary slightly depending on the model.
Add New Comment