User Manual Q&AAnswer
Nov 08, 2024 - 09:44 PM
To pair the wireless microphones with the receiver in the Vangoa KU-33A UHF Wireless Microphone System, follow these steps:
1. Power on the receiver unit by plugging it into a power source using the included power adapter. Make sure the receiver is turned on and ready to receive signals.
2. Install fresh batteries in the wireless microphones. Open the microphone battery compartments and insert the batteries according to the polarity markings.
3. On the receiver unit, locate the sync or pairing button. This button is usually labeled or indicated in the user manual.
4. Press and hold the sync or pairing button on the receiver until the LED indicator starts flashing or enters pairing mode. Refer to the user manual for the specific pairing mode indication.
5. On each wireless microphone, locate the sync or pairing button. This button is typically located on the microphone body or inside the battery compartment.
6. Press and hold the sync or pairing button on each wireless microphone until the LED indicator starts flashing or enters pairing mode. Again, refer to the user manual for the specific pairing mode indication.
7. Once the receiver and microphones are in pairing mode, they will search for each other and establish a connection. The LED indicators on both the receiver and microphones should stop flashing and remain solid when the pairing is successful.
8. Perform a sound check by speaking or singing into each wireless microphone and listening for audio output through your sound system. Adjust the audio levels on your audio equipment as needed.
Note: If you encounter any issues during the pairing process, refer to the user manual for troubleshooting tips or contact Vangoa customer support for assistance.
Please refer to the Vangoa KU-33A UHF Wireless Microphone System User's Manual for more detailed instructions and illustrations.
Add New Comment