User Manual Q&AAnswer
Nov 08, 2024 - 09:33 PM
To set up the JIMEOG GLXD-4 Dual Channel Receiver & Handheld Mic system, follow these steps:
1. Power On: Ensure both the microphone and receiver are powered on.
2. Frequency/Channel Setup: Sync the microphone and receiver to the same frequency/channel for a reliable wireless connection. To do this, select the SET button on the receiver, then select the UP button to scroll through the available frequencies/channels. Once you've selected the desired frequency/channel, press SET again to confirm.
3. Microphone Placement: Position the microphone at the desired angle and distance, aiming it at the sound source.
4. Volume Adjustment: Adjust the microphone gain and receiver volume to attain your desired audio level. Use the controls on the receiver to adjust the volume.
5. Mute Functionality: Familiarize yourself with the microphone's mute feature for easy audio control during usage. The handheld microphone generally includes a built-in mute button for convenient on/off control.
6. Battery Management: Monitor battery life for rechargeable batteries and recharge or replace them as required. The handheld microphones often provide several hours of use on a full charge.
7. Sound Check: Before important events or performances, conduct a sound check to ensure proper microphone functionality and audio quality. Adjust the microphone gain and receiver volume as needed.
8. Monitoring: If available, use headphones connected to the receiver for real-time audio monitoring.
9. Receiver Output: Connect the receiver's output to your chosen audio system or recording equipment using appropriate cables.
By following these steps, you should be able to set up and use the JIMEOG GLXD-4 Dual Channel Receiver & Handheld Mic system effectively. For further details and troubleshooting, refer to the user manual provided with the product.
Add New Comment