User Manual Q&AAnswer
Nov 08, 2024 - 09:32 PM
To pair the WH-8000 microphone with an Anchor Audio sound system, please follow these steps:
1. Power on both the WH-8000 microphone and the Anchor Audio sound system.
2. Make sure the microphone and sound system are within close proximity to each other.
3. On the sound system, locate the wireless receiver unit.
4. Press the "Pair" or "Sync" button on the wireless receiver. This will activate the pairing mode.
5. On the WH-8000 microphone, locate the power button or switch and turn it on.
6. Within a few seconds, the microphone and receiver should automatically connect and sync. You may see a confirmation light or hear a beep indicating successful pairing.
7. Test the microphone by speaking into it and checking if the sound is being transmitted through the sound system.
Note: The exact pairing process may vary depending on the specific model of the Anchor Audio sound system you are using. For detailed instructions tailored to your system, please refer to the user manual provided with your sound system.
If you encounter any difficulties during the pairing process or have further questions, we recommend reaching out to Anchor Audio's technical support for expert assistance. They can provide specific guidance and troubleshooting for your particular setup.
Add New Comment