User Manual Q&AAnswer
Nov 08, 2024 - 09:30 PM
To connect the Primo UD3169 Vocal Microphone to your computer, you will need an XLR to USB audio interface. Here is a step-by-step guide on how to connect the microphone:
1. Plug one end of the XLR cable into the XLR terminal on the Primo UD3169 microphone.
2. Connect the other end of the XLR cable to the XLR input on your USB audio interface.
3. Make sure your USB audio interface is connected to your computer via USB.
4. On your computer, open your recording software or digital audio workstation (DAW).
5. In the software settings, select the USB audio interface as the audio input device.
6. Ensure that phantom power is activated on your USB audio interface if required for the microphone.
7. Adjust the input gain on your USB audio interface to achieve the desired recording volume without distortion.
8. You can now start recording with the Primo UD3169 Vocal Microphone through your USB audio interface.
Note: If your USB audio interface does not have an XLR input, you may need to use an XLR to USB adapter to connect the microphone directly to your computer. Make sure to check the compatibility of the adapter with your specific microphone and computer setup.
For further assistance or troubleshooting, refer to the user manual provided with the Primo UD3169 Vocal Microphone or contact Primo's technical support for professional guidance.
Add New Comment