User Manual Q&AAnswer
Nov 08, 2024 - 05:57 AM
To connect your device to the Reach Sonic RS-6210 Portable Bluetooth PA System, please follow these steps:
1. Power on the RS-6210 and ensure it is fully charged or connected to a power source.
2. Activate Bluetooth on your device (smartphone, tablet, etc.).
3. On your device, search for available Bluetooth devices.
4. Make sure the RS-6210 is discoverable by pressing the Bluetooth button or following the instructions in the user manual.
5. Once the RS-6210 appears in the list of available devices on your device, select it to initiate the pairing process.
6. If prompted, enter the pairing code provided in the user manual or on the RS-6210's display.
7. After successful pairing, you should see a confirmation message on your device, indicating that it is connected to the RS-6210.
8. You can now start streaming audio wirelessly from your device to the PA system.
If you are still unable to connect your device to the RS-6210 via Bluetooth, please ensure that you are within the Bluetooth range of the system and that there are no obstructions or interference causing connectivity issues. Additionally, try clearing any previously paired devices from both the RS-6210 and your device's Bluetooth settings before attempting to pair again.
For more detailed instructions and troubleshooting tips, please refer to the user manual included with the Reach Sonic RS-6210 Portable Bluetooth PA System.
Add New Comment