Answer
Nov 08, 2024 - 05:32 AM
To power on the MixPre-3, you can use one of the following methods:
1. AA Batteries: Use the MX4AA four AA battery sled or the MX-8AA eight AA battery sled. It is recommended to use NiMH or Energizer Ultimate Lithium rechargeable AA batteries. Alkaline batteries are not suitable for long run times.
2. L-Mount Batteries: Use the optional MX-LMount to power the MixPre-3 with L-Mount batteries.
3. USB-C: Connect a USB-C cable to a computer, USB-C power brick, or a wall outlet using the included MX-PSU.
Once you have connected the power source, use the power switch located on the left panel to turn on the MixPre-3. The power status icon on the top right corner of the screen should turn green. If it is orange or red, try using an alternative power source.
Please refer to the Sound Devices MixPre-3 USB Audio Interface Quick Start Guide for more detailed instructions and information.
Add New Comment