User Manual Q&AAnswer
Nov 08, 2024 - 05:30 AM
To connect the Tinsea HT-320H microphone to your audio equipment, you will need an XLR cable and a device that can provide phantom power, such as a mixer or audio interface. Here's a step-by-step guide:
1. Locate the XLR output on the HT-320H microphone. It is usually located at the bottom of the microphone body.
2. Take one end of the XLR cable and plug it into the XLR output of the microphone. Make sure it is securely connected.
3. Connect the other end of the XLR cable to the XLR input of your audio equipment. If you are using a mixer, locate the XLR input channel that corresponds to the microphone's input. If you are using an audio interface, connect the XLR cable to one of the available XLR inputs.
4. Ensure that your audio equipment is capable of providing phantom power. Phantom power is required for the HT-320H microphone to operate. Most mixers and audio interfaces have a switch or button to enable phantom power. Consult the user manual of your specific device to locate and activate phantom power.
5. Once phantom power is enabled, the HT-320H microphone should receive power and be ready to use. Adjust the input gain on your audio equipment to set the desired recording level.
Note: It is important to use high-quality XLR cables to ensure optimal signal transmission and audio fidelity. Additionally, always handle the microphone and cables with care to avoid any damage to the sensitive condenser components.
Add New Comment