User Manual Q&AAnswer
Nov 08, 2024 - 05:18 AM
Connecting the Goldwood DPI-1200C/8 Passive DJ Speaker to your amplifier or receiver is a straightforward process. Here's a step-by-step guide:
1. Ensure that your amplifier or receiver is powered off before making any connections.
2. Locate the speaker wire outputs on your amplifier or receiver. These are typically labeled as "Speaker Out" or "Speaker Output."
3. Take the appropriate speaker wire and strip off a small section of insulation from each end.
4. Identify the positive (+) and negative (-) terminals on the Goldwood DPI-1200C/8 speaker. These are usually indicated by red and black markings or labels.
5. Insert the stripped end of the speaker wire into the corresponding positive (+) and negative (-) terminals on the speaker. Ensure a secure connection by tightening any screws or clamps.
6. Repeat steps 4 and 5 for the other end of the speaker wire, connecting it to the corresponding positive (+) and negative (-) terminals on your amplifier or receiver.
7. Once all connections are secure, power on your amplifier or receiver.
8. Select the appropriate input source on your amplifier or receiver that corresponds to the Goldwood DPI-1200C/8 speaker.
9. Adjust the volume and audio settings on your amplifier or receiver to achieve the desired sound levels and balance.
10. Experiment with the settings to find the optimal configuration for your specific application.
By following these steps, you should be able to successfully connect the Goldwood DPI-1200C/8 Passive DJ Speaker to your amplifier or receiver and enjoy high-quality audio performance. For additional guidance, refer to the instruction manual provided with the speaker.
Add New Comment