Answer
Nov 08, 2024 - 05:07 AM
Updating the firmware of the Klipsch Axiim Link Wireless Transmitter is a straightforward process. Here's how you can do it:
1. Download the Axiim LINK mobile app: To update the firmware, you will need to download the Axiim LINK mobile app, which is available for both iOS and Android devices. You can find the app on the respective app stores.
2. Connect your mobile device to the transmitter: Ensure that your mobile device is connected to the same Wi-Fi network as the Axiim Link Wireless Transmitter. This connection is necessary for the firmware update process.
3. Launch the Axiim LINK app: Open the Axiim LINK app on your mobile device.
4. Check for firmware updates: Within the app, navigate to the settings or firmware section. Look for an option to check for firmware updates. Tap on it to initiate the process.
5. Follow the on-screen instructions: The app will guide you through the firmware update process. Make sure to follow the instructions carefully.
6. Wait for the update to complete: The firmware update may take some time to download and install. Ensure that your mobile device remains connected to the Wi-Fi network and the Axiim Link Wireless Transmitter during the entire process.
7. Restart the transmitter: Once the firmware update is complete, it is recommended to restart the Axiim Link Wireless Transmitter. Power it off, wait for a few seconds, and then power it back on.
By following these steps, you should be able to update the firmware of your Klipsch Axiim Link Wireless Transmitter using the Axiim LINK mobile app. It's always a good idea to keep your device's firmware up to date to ensure optimal performance and access to any new features or improvements.
Add New Comment