User Manual Q&AAnswer
Nov 08, 2024 - 03:58 AM
The installation of the JBL CONTROL 26CT Ceiling Loudspeaker is quick and easy. Here are the steps to install the speaker:
1. Start by marking the cutout on the ceiling using the provided template.
2. If needed, reinforce the top of the ceiling material by installing the innovative C-shaped support backing plate from below through the cutout.
3. xxxx the tile support rails onto the C-plate to extend support to the T-channel grid in suspended ceiling installations.
4. Fit the speaker through the cutout and secure it in place using the three mounting tabs that tighten onto the C-plate or directly onto the ceiling material.
5. Connect the wiring to the removable locking connector on the speaker. The connector has xxxx -down terminals for secure wire termination.
6. If using multiple speakers, jump the speaker signal to additional speakers using the loop-thru output terminals.
7. Once the installation is complete, you can paint the speaker trim and grille to match your decor. A paint shield is provided to cover the drivers while painting the rim.
For more detailed instructions and illustrations, please refer to the JBL CONTROL 26CT Ceiling Loudspeaker manual.
Add New Comment