User Manual Q&AAnswer
Nov 08, 2024 - 03:57 AM
To connect the DM80 Tower Speaker to the DM90 height module, follow these steps:
1. Ensure that both the DM80 Tower Speaker and the DM90 height module are powered off and unplugged.
2. Locate the snap-in connection system on the top of the DM80 Tower Speaker. It is designed to securely attach the DM90 height module.
3. Align the connectors on the bottom of the DM90 height module with the corresponding connectors on the top of the DM80 Tower Speaker.
4. Gently push the DM90 height module down onto the snap-in connection system until it is securely attached.
5. Once the DM90 height module is properly connected, you can power on both the DM80 Tower Speaker and the DM90 height module.
6. Ensure that your audio source (e.g., TV, Blu-ray player) is connected to the DM80 Tower Speaker according to the recommended setup in the user manual.
7. Adjust the settings on your audio source to enable Dolby Atmos or DTS:X audio formats, if desired.
8. Test the audio output by playing content that supports Dolby Atmos or DTS:X. You should experience an immersive overhead audio experience with the combined DM80 Tower Speaker and DM90 height module setup.
Please refer to the user manual for additional information and troubleshooting tips regarding the connection and setup of the DM80 Tower Speaker and DM90 height module.
Add New Comment